دعوة للترشح لدرجة خبير بالمنتدى لأهل الخبرة

Career Objective : Instrument, Control and Metering Engineer
Registration & associates : Approved From ADWEA (Abu Dhabi Water
Electricity Authority) as A.R.E I&C Engineer
: Member in Egyptian engineering syndicate
Education
 B. SC. Degree in May 1995.
- Menoufiia University - Faculty of Electronic Engineering, Menouf, Automatic Control &Measurements Department. & Adaptive control Project On 1995.
- Finishing preparatory studies for Master Degree in Application by FUZZY control from MANSOURA University “one year program”.

» Experience Record
 From February 2005 to February 2006
“As consultant Engineer”: DR. M.H.ALI EL SAIE
Consultant Engineering Firm
• ABU DHABI WATER & ELECTRICITY AUTHORITY ADWEA (ABU DHABI - UAE). REPLACEMENT OF GAS CHLORINATION SYSTEM BY SODUIM HYPOCHLORITE AT VARIOUS PUMPING STATION IN ABU DHABI EMIRATE CONTRACT NO.: 1577

Responsible for the following:
 Supervising of the installation, testing and commissioning the Control Instrumentation package including local control panel (Power supply, PLC, Input/Output Cards…), control cables and Field instrumentation (Flow, Pressure, Temperature, Valves…)
 Supervising integrations with the existing SCADA at different sites
 Reviewing and approval of instrument technical and material
 Conducting the progress review meetings with the contractor & client
 Preparing the instrumentation monthly progress report

 From 9/12/97 to 30/01/2005 & From February 2006 tell now
Belyiem petroleum company (PETROBEL)
(Oil & Gas Production and Industries)
As site engineer In Abu Madi Gas Field in Maintenance Department
Responsible for the following:
 Process
I was participating in the following Plants
 Off/On Shore facilities
 LTS Plants
 LPG plants
 Storage and Loading Plants for natural and Liquid gas
 Transfer gas plants by using turbo compressor
 Metering plants
 Heaters system ( direct / indirect heat )

 Natural Gas Measurement and Control Systems
 How to investigate a measurement system
 Principal of operation for metering elements
 Metering philosophy and standard references
 Gas metering system model 7951 gas flow computer system (Solartron).
 Gas and liquid metering system based on Ultrasonic flow meters, orifice blade and conventional totalizes.
 Liquid metering system, electronic counter (VEGA) and Positive Displacement flow Meters PDM (PETROL).
 Plants Controlled By August PLC, Siemens Simatic S5, DCS Foxboro I/A Series and S7 PLC.
 Compressor units controlled by Allen Bradley P.L.C and Toshiba.
 Off Shore Platforms Controlled by DCS based On AC800F (ABB system) and DCS Foxboro I/A Series
 Skids Controlled by DCS (Moore) Apac’s And Foxboro I/A Series.
 Arescon Mod 30 System Conventional To Control Pressure, Temperature, Flow and Level (Conventional Control).
 Vibration system (Bently Nevada series 9000, 7200 and 3300).
 Maintenance of the Field Instruments
1- All gauges, Switches and Transmitters For (Pres., Temp. Level And Flow)
2- All Control Valves (Nuovo Pignone, Fisher...), I/P Converter, positioner
3- Shutoff valve, blow down valve and its local control panel (pneumatic system)
4- Fire fighting system (Gas/ fire detection)
5- Life analyzer system for oxygen (O.2 analyzer) on air exhaust of heaters
And chlorine (Residual chlorine analyzer) on desalination water

 Gas Turbines
• Preparing for the following preventive maintenance from view instrument and control system.

For PGT 5 – frame 1
Inspection 10000, 20000, 40000 and 80000 working hour add to any corrective maintenance during this is periods

For PGT 10
Inspection 4000, 8000, 16000 and 30000 working hour add to any corrective maintenance during this is periods
 Nuovo Pignone Turbine Turbo-compressors Fram1
Controlled By Speed Tronic System
 Nuovo Pignone Turbine Turbo-Generators Fram1
Controlled By Speed Tronic System
 Solar Turbine Turbo-compressor Fram1 Controlled By
Allen Bradley P.L.C 5/15 software series 6200
 Nuovo Pignone Turbine Turbo-compressor Pgt_10
Controlled by D.C.S (Moore) software 4-mation and (Human
Machine Interface- HMI) in touch

 Projects
Working with Egyptian Maintenance Co. (EMC) in Review the Installation, Commissioning and start Up of NGL plant for United Gas Derivative Company (UGDC), PORT SAID project (part time)

 Sharing on the following projects during working with Petrobel
 Preparation for new/rehabilitation control and Instrument project
 Commissioning and start up up-grading 6th unit LTS plant from PLC to D.C.S (Moore) Apac’s System.
 Up-grad the control system for LPG plant from Siemens Simatic S5 to S7 P.L.C System.
 Review design, Installation, Commissioning and start up for BALTIM plant on/off-shore DCS linked by SCADA system Foxboro I/A Series System.
 Installation, commissioning and start up waste water treatment controlled by DCS Foxboro I/A Series System.
 Review design, Installation, commissioning and start up direct heater controlled by PLC QUADLOK Moore
 Installation, commissioning and start up the Up-grad the vibration system from Bently Nevada series 9000 & 7200 to 3500 (Hardware and Software)

» Training
 Abroad Training
 D.C.S Invensys (Foxboro I/A Series) from 20/9/1999 to 1/10/1999, Foxboro Milan Italy.
 Local Training (Egypt)
 Tropical Helicopter Underwater Escape(5195THUET) Cert. No. 0637 date 12th Apr 10, M&O PETRPLIFT EGYPT
 Effective English Report Writing Skills from 10/1/2010 to 14/1/2010, PROFESSIONAL CONSULTANCY & TRAINING (PCT)
 Presentation Skills and Effective from 1/2/2009 to 5/2/2009, TOTAL INTERNATIONAL EXPERTISE CO. (TOTALITY)
 Develop the skills of the first level of supervision from 11/5/2008 to 15/5/2008, El Manar Training Center
 Strategic Planning and Work Action Plans from 13/3/2008 to 20/3/2008, Dr. P. Rahn & Partner Ltd., Cairo
 Programmable Logic Controllers (PLC) from 17/6/2007 to 21/6/2007, Enppi Human Resource Division
 Gas turbine operation and maintenance from 25/4/2004 to 29/4/2004, Alexandria Maintenance Co. (PETROMENT) Egyptian Petroleum Authority
 Programmable logic control system (PLC) hardware & software From 14/9 to 18/9/2003, Egypt for Information & Technology
 Advanced distributed control system, data acquisitions and application Using LABVIEW (G-language) from 13 to24/4/2003, Egypt for Information & Technology.
 Distributed control system & SCADA/Lookout, LABVIEW from 2/2/2003 to 6/2/2003, Egypt for Information & Technology.
 Valves from 9-20/5/1999, El-Dar El-Arabia for Training & Consultations (DATCO)
 Visual Basic & Advanced Application from 10/4 to 15/8/1996, Scientific City Center
 PC’s Service 1/8 to30/8/1994, Computer Center - MANSOURA University


» Personal information
UAE Driving License No.: 497300/A Expiry Date: 25/6/2015
Date of Birth : 17/3/1971
Marital Status : Married with four kids
Language Arabic : Mother Language. English: Good Written and Spoken.
Citizenship : Egyptian Military Service: Completed